Mounting instructions channel letters

 

Profile 3 incl. LED lighting

  1. Remove the acrylic base of the letter by removing the screws on the side.
  2. Mount  the  base  with  the  supplied spacer tubes (3 cm) to the surface.
  3. Draw the two wires through the hole in the bottom of the sign that has been specially drilled for this, subsequently connect it to the supplied wiring using the supplied connectors.
  4. Connect the main cable to the transfor-mer(s) according  to  the  enclosed diagram.
  5. Put the aluminium cover back on and fasten with the stainless steel screws.

For optimal illumination and light reflecti-on, channel letters Profile 3 can only be mounted  on  a  matte  and  light-coloured background

 

Profile 4 and 5 incl. LED lighting

  1. Remove  the  acrylic  face  from  the aluminium  base  of  the  letter  by removing the screws on the side.
  2. Mount  the  aluminium  letter  straight onto  the  wall  or  on  a  u-profile/con-struction.
  3. Pass the two wires through the back (using a swivel or similar) and connect with the supplied wire using supplied connectors.
  4. Connect the main cable to the transformer(s) complying with the directions in the enclosed diagram.
  5. Put  the  aluminium  base  and  acrylic front back on the sign and fasten with stainless  steel  screws  (screws  one turn back for expansion of the acrylic font).

 

 

Back to overview